Vilnius · Kaunas · Klaipėda · Šiauliai Mon–Fri 9–18
Customer reviews
EN
Call us +370 656 95553

Service point in Kaunas · Baltijos g. 58, Šilainiai

Power tool repair in Kaunas, Šilainiai

Power tool repair in Kaunas: rotary hammers, angle grinders, drills, screwdrivers and saws. Initial diagnostics costs €10, and you can come on weekdays without booking.

+370 656 95553 Prices
A technician repairs a power tool at the Kaunas service point in Šilainiai ŠilainiaiService point in Kaunas – in the new „Rimi” Warranty on work
Šilainiai
Service point in Kaunas – in the new „Rimi”
Mon–Fri 9–18
Opening hours
10 €
Initial diagnostics

elMeistrai Kaunas

Baltijos g. 58, LT-48221 Kaunas (Šilainiai)

In Šilainiai, in the new "Rimi" store on Baltijos Street.

  • Mon–Fri 9–18
  • [email protected]
  • No appointment needed – just come during opening hours
+370 656 95553 Map

Power tool repair in Kaunas often begins with a situation where you need the tool right here and now: the rotary hammer stopped hammering in the middle of a wall, the grinder is sparking, or the cordless screwdriver runs out of power after a few screws. The Kaunas service point is located in Šilainiai, in the new „Rimi” store, so it is convenient to bring your tool on the way from work or shopping.

The tool you bring in is inspected by a technician: they check the cable, plug, switch, carbon brushes, motor and mechanics. Then they tell you what is broken and how much the repair will cost. There is no need to arrange the start of work in advance – just come on a weekday.

  • Where is the service point in Kaunas? In Šilainiai, in the new „Rimi” store. You can bring your tool straight to this service point.
  • When is the service point open? Monday to Friday from 9 to 18. The service point is closed at weekends.
  • How much does diagnostics cost? The initial diagnostics of a power tool costs €10. We tell you the repair price after diagnostics, before we start the work.
  • Do I need to book an appointment? No. There is no need to book or call in advance – just come during working hours.

What faults are brought to the Kaunas service point

Power tool repair prices in Kaunas

Diagnostics

ServicePriceWarranty
Initial diagnostics10 €–

Electrical part

ServicePriceWarranty
Electrical part repairfrom 15 €–
Socket replacement or repairfrom 15 €–
Mainboard repairfrom 45 €–
Carbon brush replacementfrom 12 €–
Switch replacementfrom 15 €–
Power cable replacementfrom 12 €–

Mechanics

ServicePriceWarranty
Mechanical repairsfrom 15 €–
Chuck replacementfrom 18 €–
Bearing replacementfrom 25 €–
Gearbox repairfrom 30 €–

Chargers, batteries, documents

ServicePriceWarranty
Charger repairfrom 12 €–
Battery cell replacementfrom 30 €–
Issuing a defect report for insurance (covered by the insurance)30 €–
Prices are indicative. We provide the exact repair price after diagnostics and agree on it with you before starting work.

Power tool repair in Kaunas: how to bring your tool to Šilainiai

You will find the service point in Šilainiai, in the new „Rimi” store. We work Monday to Friday from 9 to 18 h, and we are closed at weekends. There is no need to book or call before you arrive.

It is best to bring the tool as it is: with its cable or charger set and, if you have one, its case. For a cordless tool, it is worth bringing the battery too, because the fault may lie not in the tool itself but in the battery cells or the charger.

Before you come, remove the drill bit, disc or saw blade – this will make it easier for the technician to check the chuck and the gearing.

What happens when you leave a tool for diagnostics

The initial diagnostics costs €10. During it, we find the cause of the fault, and we tell you the repair price after diagnostics and agree on it with you before starting the work. We do not replace anything without your consent.

We use original parts and provide a warranty for the repair carried out. If the tool needs to be documented for insurance, we can issue a defect report – it costs €30 and is paid by the insurance company.

The nature of faults varies greatly. For some tools, new carbon brushes (from €12) or a power cable (from €12) are enough, while others need bearings replaced (from €25) or the gearbox repaired (from €30).

When a tool is worth repairing, and when you should first look into the cause

A professional-grade rotary hammer, angle grinder or drill is usually worth repairing, because most parts – brushes, switch, bearings, chuck – can be replaced individually. The price list below shows the starting price of typical jobs.

If the tool is sparking, smoking or smells of burning, stop using it immediately. You can read about the most common causes of sparking in the article Why a power tool sparks.

With cordless tools, the fault sometimes lies not in the motor but in the battery. How to recognise this is described in the article Reviving a power tool battery, and you can find more general information about the components here.

  • Frequent use of a rotary hammer or grinder in a dusty environment wears out brushes and bearings faster.
  • A weak impact or a squeak usually indicates wear of mechanical parts.
  • A battery that does not charge may also mean a faulty charger – we check this during diagnostics.

You can find the full description of power tool repair on the main page.

What to bring to the Kaunas service point

  • The faulty tool with its cable or charger set
  • The battery and charger, if the tool is cordless
  • The case or accessories related to the fault (for example, the chuck key)
  • A short description of the fault: when and how the tool stopped working properly
  • Documents, if you need a fault report for insurance

Frequently asked questions about tool repair in Kaunas

Which manufacturers do you repair?

We repair, for example, Bosch, Makita, DeWalt, Metabo, Hitachi or Sparky tools, as well as those of other manufacturers. Whether a specific model can be repaired becomes clear after diagnostics.

Do you repair cordless tools?

Yes. We repair chargers (from €12) and replace battery cells (from €30). We determine whether the problem is in the battery or in the tool itself during diagnostics.

Can I get a certificate for insurance?

Yes, we issue a defect report for insurance. It costs €30 and is paid by the insurance company. Tell the technician about this when you leave the tool.

Does the repair come with a warranty?

We provide a warranty for the work performed. We use original parts, and we agree on the repair price before starting work.

What should I do if I do not agree with the repair price?

We do not carry out the repair without your consent. In that case, you only pay for the initial diagnostics – €10.

What our customers say

All reviews

  • Mantas Vinckas

    2021 · Google

    I brought in a tool, they told me the time and date, the technician called at the agreed time, and after diagnosing the fault told me how much it would cost and how long it would take. They fixed it even faster, I was pleased, the tool works. I RECOMMEND THEM FOR TOOL REPAIRS! …

  • Dovilė Sabaliauskienė

    August 2026 · Google

    Sincerest thanks to the technician from Šiauliai and the highest recommendations to the entire elMeistrai staff in Kaunas. ⭐⭐⭐⭐⭐

  • Milena Tulickaite

    December 2025 · Google

    Fast, high-quality, polite and clear☺️

  • Gytenis Mikulenas

    2025 · Google

    Excellent service! Instead of paying 1K to Apple certified dealer service for replacing broken Macbook mainboard, elmeistrai did it for much much cheaper!

Professional power tool repair throughout Lithuania in other cities

What else we repair in Kaunas

Is your device broken?

Give us a call – we will tell you what we can do and how long it will take.

+370 656 95553Find a service point
Call Find a service point