Vilnius · Kaunas · Klaipėda · Šiauliai Mon–Fri 9–18
Customer reviews
EN
Call us +370 617 77731

Service point in Klaipėda · Sausio 15-osios g. 13

Welding machine repair in Klaipėda: diagnostics €10

Welding machine repair in Klaipėda at the elMeistrai service: initial diagnostics cost 10 €, repair – from 15 €. Come on weekdays 9:00–18:00; there is no need to book or call in advance.

+370 617 77731 Prices
Welding machine repair at the elMeistrai service point in Klaipėda Next to “Elesen”Klaipėda service centre Warranty on work
Next to “Elesen”
Klaipėda service centre
Mon–Fri 9–18
Opening hours
10 €
Initial diagnostics
from €15
Repair

elMeisters in Klaipeda

Sausio 15-osios g. 13, LT-91136 Klaipėda

Stop in the "Elesen" car park (entrance from Sausio 15-osios g.). The service point is on the ground floor of the five-storey building adjoining "Elesen", with the entrance from the courtyard side; there is a "Taisykla7" sign on the wall.

  • Mon–Fri 9–18
  • [email protected]
  • No appointment needed – just come during opening hours
+370 617 77731 Map

Welding machine repair in Klaipėda usually starts with a simple question: what does the machine do, and what does it no longer do? One won’t switch on, another switches on but doesn’t produce an arc, a third overheats after a few minutes and shuts off. The same symptom can be caused by a worn cable or by a faulty power component, so the machine must be checked first.

The Klaipėda service centre is open on weekdays, and you can bring the machine simply by dropping in – no prior appointment needed. The initial diagnostics costs €10. We tell you the repair price after it and agree on it before we start repairing.

  • Where are welding machines repaired in Klaipėda? The service centre is next to “Elesen”: park in their car park; the entrance is on the ground floor of the adjacent five-storey building, from the courtyard side – look for the “Taisykla7” sign.
  • When is the Klaipėda service centre open? Monday to Friday from 9:00 to 18:00. The service centre is closed at weekends.
  • How much does the initial diagnostics cost? The initial diagnostics costs €10. We tell you the repair price after it and agree on it before starting work.
  • Do I need to make an appointment in advance? No. You don’t have to book or call – just come with the machine during opening hours.

Faults for which machines are brought to the Klaipėda service centre

Welding machine repair prices in Klaipėda

Diagnostics

ServicePriceWarranty
Initial diagnostics10 €–

Repair

ServicePriceWarranty
Welding machine repair (cables, connectors and other faults)from 15 €–

Cables and mechanics

ServicePriceWarranty
Torch cable and connector repairfrom 25 €–
Wire feed mechanism repair (rollers, motor)from 35 €–
Gas valve and hose repairfrom 25 €–

Cooling and power supply

ServicePriceWarranty
Fan replacement and internal cleaningfrom 25 €–
Repair of the power supply circuit, rectifier and fusesfrom 40 €–

Power and control electronics

ServicePriceWarranty
Replacement of power transistors and diodesfrom 55 €–
Control board repairsfrom 60 €–
We give the final repair price after diagnosis and agree it with you before starting work. For more complex faults, for example in the power or control electronics, the price depends on the model and the parts required.

How to find the service centre and bring in your machine

The Klaipėda service centre is located next to “Elesen”. Park in this site’s car park, not by the shop itself: the service centre is on the ground floor of the adjacent five-storey building, and the entrance is from the courtyard side. A “Taisykla7” sign hangs on the wall, which makes the place easy to recognise.

Welding machines are heavy, so it is worth thinking in advance about how you will carry it. An inverter MMA machine can often be carried by its handle or strap, while a larger MIG/MAG or TIG unit is better moved by two people. Coil the cables into loose loops so that the connectors do not break.

If the machine failed suddenly, do not take anything apart and do not try to plug it in again “out of curiosity”: the internal capacitors can retain voltage even after the plug is pulled out.

What happens when you leave the machine for diagnostics

The technician checks the power section, power components, controls and external parts: the torch, cables, earth clamp, and the gas and wire feed parts. You pay €10 for this stage. Then we tell you what is broken and how much the repair would cost.

No repair is started without your consent. Original parts are used, the work comes with a warranty, and if the machine belongs to a business or you need a document for an insurer, we can issue a certificate. You will find preliminary prices in the list below, but the final amount depends on the specific fault and model.

When a welding machine is worth repairing

In most cases, repair is worthwhile. A worn torch cable, a clogged or faulty fan, a leaking gas hose or poor wire feed are relatively simple faults, and according to our price list their repair starts from €15–35.

More expensive jobs include replacing power transistors or repairing the control board. Here it is worth comparing the cost with the value and age of the machine, but a decision can only be made once you know the exact price after diagnostics.

Some problems are caused not by the machine itself, but by consumables. If the arc is unstable or the electrode sticks, first check whether the electrodes are suitable – we write about this in the article how to choose the right electrodes for welding. You can also read about choosing parts and tools here.

If the machine gives you an electric shock or you can smell burning, stop using it and bring it in for inspection immediately.

What to bring to the Klaipėda service point

  • The welding machine itself and the power cable
  • The torch, electrode holder and earth cable with clamp
  • The gas hose or regulator, if the fault is gas-related
  • A short description of when and how the fault appeared and whether there was an error code
  • Information on whether a certificate is required for an insurer or a company

Frequently asked questions about welding machine repair in Klaipėda

Do you repair MIG/MAG, TIG and MMA machines?

Yes, we accept all of these types of welding machines. You can find the full list of faults and services on the welding machine repair page.

How much does a repair cost?

Repairs start from 15 €, while more expensive work, such as replacing power transistors or repairing the control board, costs more. We will tell you the exact amount after the diagnostics and agree on it with you before the repair.

Do I need to bring the complete set of the machine?

The most important items are the machine itself and the power cable. If the problem is related to the torch, wire, gas or earth clamp, bringing these accessories will allow the technician to check the entire circuit.

Is a warranty provided for repairs?

Yes, a warranty is provided for the work carried out.

Can I get a certificate for an insurance company?

Yes, we issue certificates for insurance companies and other institutions. Please mention this need when you leave the machine.

What our customers say

All reviews

  • Dovilė Sabaliauskienė

    August 2026 · Google

    Sincerest thanks to the technician from Šiauliai and the highest recommendations to the entire elMeistrai staff in Kaunas. ⭐⭐⭐⭐⭐

  • Milena Tulickaite

    December 2025 · Google

    Fast, high-quality, polite and clear☺️

  • Gytenis Mikulenas

    2025 · Google

    Excellent service! Instead of paying 1K to Apple certified dealer service for replacing broken Macbook mainboard, elmeistrai did it for much much cheaper!

  • Raimondas Bakšys

    2025 · Google

    I bring in all kinds of equipment for repair and they always fix it quickly, well and at a fair price. Thank you! …

Professional welding machine repair throughout Lithuania in other cities

What else we repair in Klaipėda

Is your device broken?

Give us a call – we will tell you what we can do and how long it will take.

+370 617 77731Find a service point
Call Find a service point