Vilnius · Kaunas · Klaipėda · Šiauliai Mon–Fri 9–18
Customer reviews
EN
Call us +370 656 95553

Service point in Kaunas · Baltijos g. 58, Šilainiai

Iron repair at the Šilainiai service point in Kaunas

Iron repair in Kaunas: bring an iron that does not heat up, drips or produces no steam to the Šilainiai service point. The diagnostic costs 10 €, and we tell you the repair price before starting work.

+370 656 95553 Prices
A technician checks a steam iron at the Kaunas Šilainiai service point Šilainiai, „Rimi”Service centre in Kaunas Warranty on work
Šilainiai, „Rimi”
Service centre in Kaunas
Mon–Fri 9–18
Opening hours
10 €
Initial diagnostics

elMeistrai Kaunas

Baltijos g. 58, LT-48221 Kaunas (Šilainiai)

In Šilainiai, in the new "Rimi" store on Baltijos Street.

  • Mon–Fri 9–18
  • [email protected]
  • No appointment needed – just come during opening hours
+370 656 95553 Map

Iron repair in Kaunas does not necessarily mean the appliance has to be replaced with a new one. Most often a single component is to blame: a burnt-out thermal fuse, a broken wire under the casing, a steam channel clogged with limescale, or a faulty switch. This applies to a simple dry iron, a steam iron and a steam station alike.

The Kaunas service point is located in Šilainiai, in the new „Rimi” store, so you can drop the appliance off on your way back from shopping. The technician first determines the cause of the fault, tells you how much the repair will cost, and starts repairing only with your consent.

  • Where are irons repaired in Kaunas? In Šilainiai, in the new „Rimi” store on Baltijos gatvė. The exact contact details of the service points are provided on this page.
  • When is the Kaunas service point open? Monday to Friday from 9 to 18. The Kaunas service point is closed on Saturdays and Sundays.
  • How much does iron diagnostics cost? The initial diagnostics costs €10. We tell you the repair price after diagnostics and agree on it with you before starting work.
  • Do I need to book in advance? No. You do not need to book or call before arriving – just come to the service point during working hours.

Which iron faults people in Kaunas come in with

Iron repair prices: what they depend on

Diagnostics

ServicePriceWarranty
Initial diagnostics10 €–

Heating and controls

ServicePriceWarranty
Replacing the thermostat or thermal fusefrom 25 €–
Replacing the heating elementfrom 35 €–
Replacing the switch or power socketfrom 20 €–

Steam and water

ServicePriceWarranty
Replacing the steam valve or water pumpfrom 30 €–
Repairing the steam generator boiler or pumpfrom 40 €–

Cord and soleplate

ServicePriceWarranty
Power cable replacementfrom 15 €–

Iron repair in Kaunas: how to bring your appliance to the Šilainiai service point

You can come on any working day from 9 to 18. You will find the service point in Šilainiai, in the new „Rimi” store on Baltijos gatvė.

Before leaving, unplug the iron from the mains and wait until it has cooled down completely. Empty the steam iron or station: water in the tank may spill onto the electronics during transport and make the inspection more difficult.

It is not worth disassembling or cleaning the appliance yourself. If you have already tried to „fix” the fault, simply tell the technician what you did – it helps to find the cause faster.

If the iron drips or spits brown drops, bring it with its water tank and, if you have one, the measuring cup – it makes it easier for the technician to check the steam path.

What happens once you leave the iron at the service point

The technician inspects the casing and checks the power cable, heating element, thermostat, thermal fuse and steam path. You pay €10 for this initial diagnostics.

Once we know the cause, we tell you how much the repair will cost and whether the fault is worth repairing at all. We start work only after receiving your consent. Original parts are used, a warranty is provided for the work carried out, and if necessary we issue a certificate for an insurance company or another institution.

You can see the indicative price ranges in the table above: for example, replacing a power cable starts from €15, while repairing a steam station’s boiler or pump starts from €40. The final amount depends on the model and the specific part.

When an iron is worth repairing and when to think about a new one

Whether a repair is worthwhile will be shown by a diagnostic: it identifies the fault and lets you compare the repair cost with the price of a new appliance. A broken cord, a blown fuse, a clogged steam vent or an inaccurate thermostat can usually be repaired. If you are hesitating between different types, read the article „Steam iron or traditional: which to choose?”.

Do not wait, and stop using the iron, if you smell burning insulation, see a cracked cord or housing, or the appliance gives you an electric shock or trips the fuse at home. Do not plug such an iron into the mains and do not take it apart – it must first be checked by a technician.

You can find a general description of the service on the iron repair page. If you are worried about the price, the article „How much will it cost?” explains why the exact amount can only be given after a diagnostic.

What to bring to the Kaunas service point

  • The iron or steam station together with its power cord
  • The water tank, removable accessories or hose, if you have them
  • The appliance cooled down, unplugged from the mains and emptied of water
  • The purchase receipt or warranty card, if you have it
  • A short note on when and how the fault appeared
  • Documents, if you need a certificate for an insurance company

Frequently asked questions about iron repair in Kaunas

Which manufacturers’ irons do you repair?

We repair irons and steamers from Philips, Tefal, Bosch, Braun, Rowenta and other manufacturers.

Do you repair steam stations?

Yes. Repairing the boiler or pump of a steam station is one of our services, and its price starts from 40 €. We will tell you the final amount after the diagnostic.

Is a warranty provided after the repair?

Yes, a warranty is provided for the work carried out, and original parts are used for repairs. If needed, we also issue a certificate for an insurance company or another institution.

Why is my iron dripping water?

Most often because of limescale in the steam channel, a faulty steam valve, or a temperature that is too low, causing the steam to condense. The exact cause is determined by a diagnostic.

Can I decide about the repair myself?

Yes. After the diagnostic, we tell you the cause and the price, and we start work only with your consent.

What our customers say

All reviews

  • Violeta Venckute

    2018 · Google

    When I asked whether they repair irons, to my surprise they said yes, and now I can enjoy my old, irreplaceable iron again.

  • Auguste Gecaite

    2018 · Google

    iron repaired, everything works perfectly

  • Dovilė Sabaliauskienė

    August 2026 · Google

    Sincerest thanks to the technician from Šiauliai and the highest recommendations to the entire elMeistrai staff in Kaunas. ⭐⭐⭐⭐⭐

  • Milena Tulickaite

    December 2025 · Google

    Fast, high-quality, polite and clear☺️

Professional iron repair in Vilnius, Kaunas, Klaipėda and Šiauliai in other cities

What else we repair in Kaunas

Is your device broken?

Give us a call – we will tell you what we can do and how long it will take.

+370 656 95553Find a service point
Call Find a service point